Focke-Wulf Ta 154 A-2/U4 drawing needed
 

I want to convert the Monogram 1/48 TA 154A-0 into a TA 154 A-2/U4 with Jumo 213 A engines. I have the Karo As TA 154 A-2/U4 Vacuform kit for the engines. My understanding is that the all 213 A engined TA 154's had the body extended (31 in?). I have looked for drawings to show this difference in length. All reference drawings I've found (including the Karo As instructions) the body is the same length as the V-series and A-0 series. I have both the Karo As TA-154 A-0 and TA 154 A-2/U4 kits and while the engines are different the bodies on both is exactly the same length.

The Jumo 213 powered TA-154's are listed as:
TA 154 V-8
TA-154 V10
TA 154 V22
TA 154 V23

4 - TA 154 A-2s converted to A-2/U2
Werk #'s 320008-011

No Ta 154 A-4 were ever engined with the Jumo 213 (correct?).

Does any on have a source on how much to extend the body, where to extend it and for the correct body profile of the Jumo 213 engined Ta-154 to work from?

Thank you in advance.
Gary Webster

Re: Focke-Wulf Ta 154 A-2/U4 drawing needed
 

Gary, for what is worth, Monogram Close-Up #22 says the rear fuselage was lengthened 31".