Me 110 - board indicator
 

Hello.

I ask you to identify the indicator board the plane. It is likely to have originated from the plane Me 110 version G 4 (night fighter).
Unfortunately, the lack of documentation I can not confirm. I can not also specify what this indicator is served.
Thank you in advance for your help
Yours
Robert

Re: Me 110 - board indicator
 

Hi
This instrument to correct the altitude Fl. 52830 (Höhenkorrekturgeber) from Ju88
Regards,
Jarek

Re: Me 110 - board indicator
 

Thank you for the information. The indicator was also used in the aircraft He177.
It could be installed in some versions of an aircraft Me110? In the place of finding rate found parts of the plane Me110.
Regards
Robcio

Re: Me 110 - board indicator
 

Also Ju188, Höhenkorrekturgeber JHKG 1 0-10 km/950-1050 mb Fl52830, Baugruppe der Bombenzielanlage BZA 1

from http://www.deutscheluftwaffe.de

Der Hohenkorrekturgeber (QFF- und ZH-Geber)

An den Skalen des Höhenkorrekturgebers werden die Höhe des Zieles über NN (Zielhöhe ZH) und QFF am Zielort eingestellt. Für die einmalige Eichung beim Einbau in das Flugzeug besitzt der Höhenkorrekturgeber der BZA 1-B eine Höhenschleppfehlerskala. Damit werden die in der Staudruckanlage vorkommenden Schleppfehler, die eine Fehlanzeige am Höhenmesser der BZA-Anlage zur Folge haben, korrigiert.

google translate:
At the scale of the altitude correction encoder, the height of the target above sea level (target amount ZH) and QFF are set at the destination. For single calibration during installation in the aircraft altitude correction encoder of BZA 1-B has a height contouring error scale. In order to be occurring in the dynamic pressure system following error which have a nil return on the BZA altimeter system resulted corrected.

Re: Me 110 - board indicator
 

Thank you for information.:)

Re: Me 110 - board indicator
 

to be sure not on Me110G-4 i think

Also in JU 88 D
 

Here is agood pic of the gauges in the cockpit! best C