Luftwaffe and Allied Air Forces Discussion Forum

Luftwaffe and Allied Air Forces Discussion Forum (http://forum.12oclockhigh.net/index.php)
-   Luftwaffe and Axis Air Forces (http://forum.12oclockhigh.net/forumdisplay.php?f=8)
-   -   Ju388 unit codes? (http://forum.12oclockhigh.net/showthread.php?t=43148)

JohnMacG6 29th October 2015 17:50

Ju388 unit codes?
 
MANY years ago, I seem to remember reading of a Ju388 reported to carry Luftwaffe unit codes, POSSIBLY T9+?? from Versuchsverband/Ob.d.L.
Can anyone confirm this, or is my ageing memory playing tricks on me again?

Chris Goss 29th October 2015 18:30

Re: Ju388 unit codes?
 
T9+DL (V.32)

edNorth 29th October 2015 22:02

Re: Ju388 unit codes?
 
Ju 388 V32 W.Nr. 300295 DW+ZC became T9+DL but crashed 05 January 1945.
.
Some have L-0 but all had Research numbers, and most if not all references do not have dash or dot there, and all Ju 88 research numbers that I know of were painted on plain f.e. "V7", "V17" etc. (and no, 63z15 or 373z19 were not V15 or V19)

else I start write Chris-Goss or Chris.Goss :-)

Ed

Chris Goss 29th October 2015 22:25

Re: Ju388 unit codes?
 
O-K!
Chris.......Goss

edNorth 29th October 2015 22:26

Re: Ju388 unit codes?
 
:-)

Tony Kambic 30th October 2015 00:44

Re: Ju388 unit codes?
 
Ed,

Have you ever seen the elevator bob weight for the Ju388 ? It is an interesting item.

Tony

edNorth 30th October 2015 09:01

Re: Ju388 unit codes?
 
Thanks Tony. I think so, know L & R elevators were bolted togeather on C/L
but I do know its made of Ju 188 fuselage parts, and many were still Ju 88 parts.
-Ed

Tony Kambic 30th October 2015 13:15

Re: Ju388 unit codes?
 
From the Internet PilotFriend Website:

Bob weights are sometimes known as counter weights. Their purpose is to change the amount of control force required to deflect the control column under different g-loadings. Normally the amount of force the pilot must apply to the control column, assuming reversible controls, varies with airspeed only. However, by installing a bob weight the aeronautical engineer can make it more difficult to pull on the control column as g-force increases. The purpose of the bob weight is to reduce the likely hood the pilot will overstress the aircraft.

The NASM Ju388 employed a bob weight and it is a rod suspended from the control cable in the rear fuselage. Fascinating, the weight is made of green glass. Probably a heavy piece, ~ 40 lbs., it is shaped like an inverted rectangular building with a hip roof.

You can visualize it at http://ju388.de/ Inside Views. I have seen a spare one in the NASM collection.

I have been told that the DeHavilland Mosquito has a similar bob weight in the rear fuselage, but I heard it was lead or some other metal.

Tony

Tony

edNorth 31st October 2015 01:04

Re: Ju388 unit codes?
 
I know the NASM has a Ju 388 L-1, not "Ju388".
And there was the de Havilland Mosquito, not DeHavilland.
Please!

Skyraider3D 6th November 2015 22:41

Re: Ju388 unit codes?
 
In practice designations aren't always so black and white. I've seen Fokker Friendships with "F27", "F.27" and "F-27" written on them. And Fokker was very particular about everything (lots of paperwork), said to have been part of their downfall.


All times are GMT +2. The time now is 10:15.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2018, 12oclockhigh.net