Quote:
|
Originally Posted by Pilot
On the lower part you should remove bulget from the wing cannon and place there engraved panel. This is some 10 mm long in 1/48 scale. In the wing leading edge should be visible hole for the 7.92 mm machine gun. There is also vesrion Bf109E-1/B with bomb rack under the cetre plane for the ETC 500 bomb.Windshield had rounded in top section and transparent, as on E-3. Cockpit interior is the same as on the E-3 but have to note that from the E-3 interior became RLM66 and before RLM02 was inside.
|
The E-1 stayed in production longer than the E-3. The E-1/B (at least those built in mid-1940, after production of the E-3 had ceased) had the angular windshield/canopy.