Unknown emblem drawn directly on DB605 Engine

[harrison987]

Recently I found photos of a DB605 DM. In 2 places, on the side are hand-drawn hearts, which point to 2 sperate spark plugs.

Sadly, I cannot show a photo due to copyright...however...I was able to draw the emblem exactly.





It was concluded that these emblems (being upside down), actually indicated a BAD sparkplug, and was painted on by the crewchief (they pointed directly to the sparkplug).

But...I have never seen markings like this before. There is some speculation whether the engine was used in a HUNGARIAN Me109G, so I was curious if these markings could in-fact be Hungarain and NOT German, as I have never seen markings like this on a German engine...

Can anyone confirm or has anyone seen markings like this on a DB605...any other engine?

Thanks!

Mike

[Revi16]

I've worked in aviation maintenance for about 30 years and have done a little work on radials and Merlins.
It's just my opinion, but painting a symbol on the block to indicate a bad sparkplug doesn't make much sense.

Sparkplugs are pretty simple to change, as they need to be. If one was found to be bad you would just replace it.
If I was working the aircraft, I (and most mechanics) would identify the cyl. that was bad. No need to apply some type of symbol.

Regards,

[harrison987]

hmmmmmmmmmmm...then what could the meaning be?

[harrison987]

I just checked the photo again. 100% the arrow is pointing directly to the sparkplug. Annnnnnnnnnnnnd...that specific plug is painted red....

So it must be something to do with the plug...but what? Seems strange.

I do agree with what you said. If there is a bad sparkplug, why spend the time drawing this on it? Why not just repalce the plug?

Weird...

This engine was used in an Me109 that was captured and flight tested in the USA. Possible it is a US marking and plug was not replaced due to the plugs not being available in the USA? Warning not to fly as it has a bad plug?

Anyone else have any thoughts?

mike

[S Sheflin]

Greetings,

Perhaps this engine had low-compression in a couple of cylinders and required different/hotter plugs in those specific cylinders. Just an idea.

Steve Sheflin

[harrison987]

Interesting!!

Crap, wish I had pics of the plugs...then I would know for sure...

mike